REEN 2215 Renewable Energy Technologies Assignment 2025-26 | TU Dublin
| University | Technological University Dublin (TUD) |
| Subject | REEN 2215 Renewable Energy Technologies |
College of Engineering & the Built Environment
School of Electronics and Electrical Engineering
Assignment Brief
Assignment Tittle – Retrofit of Public Buildings in the Context of the Climate
Action Plan 2021
25th September 2025
| COURSES: TU215; TU208; TU207; TU217, TU417 | ACADEMIC YEAR: 2025/26 | ||
| MODULE TITLE: Renewable Energy Technologies | MODULE NO: REEN 2215 | ||
| MODULE CO-ORDINATOR: Liam Donohoe | |||
| WEIGHTING OF ASSIGNMENT IN MODULE: 50% | |||
| ASSIGNMENT TITLE: Retrofit of Public Buildings in the Context of the Climate Action Plan 2021 | |||
Struggling With Your TU Dublin REEN 2215 Renewable Energy Technologies Assignment?
ASSIGNMENT:
The Climate Action Plan 2021 sets out ambitious targets to reduce the country’s reliance upon carbonintensive fossil fuels while improving energy efficiency. The program requires the public sector to lead the way in achieving the targets. In order to meet the climate action plan targets, most public buildings will have to undergo some form of deep energy retrofit to achieve the 51% emissions reduction by 2030 and be net zero by 2050.
According to the Sustainable Energy Authority of Ireland (SEAI) Energy Efficiency in Ireland – 2021 report, buildings accounted for 35% of total final energy consumption. Moreover, public sector buildings are estimated to contribute 3,438 GWh of final energy consumption and 889 ktC02.
The aim of this assignment is to evaluate the current regulations governing the renovation of public buildings and determine, with the aid of a case study and appropriate suite of technologies to be utilised to be in building renovation to help meet these ambitions targets.
As part of this assignment you are required to:
Provide an overview of current Building Regulations governing the deep renovation of public buildings to meet the required emissions reductions by 2030.
Evaluate the options for renewable energy technology solutions that can be incorporated into buildings located within the urban environment such as the TU Dublin Park House building.
Develop a case study for TU Dublin Park House building or similar utilising the data provided.
The introduction/conclusion format, layout, indexing, references and length of document (guideline 5000 words) will constitute 10% of the overall mark. The Harvard referencing system or the IEEE referencing system is to be used throughout.
Submission:
For the submission of the assignment the following must be adhered to:
- The submission date for this assignment is Sunday 23rd of November, 2025.
- Late submission will incur a 10% penalty and assignments more than 2 weeks late will not be accepted.
- N.B. All relevant information should be included on the front cover such as Name of your programme, programme code, student name, student number, etc.
- Assignments are to be uploaded on Brightspace.
Coursework Assessment Criteria and Feedback
| COURSE: TU215; TU208; TU207; TU217, | ACADEMIC YEAR: 2025/26 |
| MODULE TITLE: Renewable Energy Technologies | MODULE NO: REEN 2215 |
| STUDENT NAME: | |
| ASSIGNMENT TITLE: Retrofit of Public Buildings in the Context of the Climate Action
Plan 2021 |
|
| ASSESSOR: Liam Donohoe | |
Submission Deadline: Sunday 23rd November 2025
| Assessment Criteria | Performance | Marks
available |
Marks awarded | Additional Comments | ||
| V.G
>70% |
Good
5069% |
Poor
<50% |
||||
| Provide an overview of current Building Regulations governing the deep renovation of public buildings to meet the required emissions reductions targets. | 30 | |||||
| Evaluate the options for renewable energy technology solutions that can be incorporated into buildings located within the urban environment such as the TU
Dublin Park House building. |
30 | |||||
| Develop a case study for TU Dublin Park House building or similar utilising the data provided. | 30 | |||||
| Introduction/Conclusion Format, layout, indexing, references and length of document (guideline 5000 words). Use of the Harvard or IEEE referencing system. | 10 | |||||
| Total | 100 | |||||
Assessor (Liam Donohoe) …………………………… Date [of Return]……
Some Important Points to Note:
- if your referencing is not correct you could fail the assignment
- If you have not drawn material from sufficient varied and quality sources you will fail the assignment.
- If you assignment does not conform to the Plagiarism Regulations contained in Appendix 3 of the Graduate Research Regulations you will incur an automatic fail: [Available: you assignment does not conform to the Plagiarism Regulations contained in Appendix 3 of the Graduate Research Regulations you will incur an automatic fail: [Available: https://www.tudublin.ie/media/website/research/postgraduate-research/documents/GRR-1stedition-Final-2022.pdf]
Confused About Retrofit of Public Buildings in the Context of the Climate Action Plan 2021?
Assignment Checklist – Format and Presentation
Front Cover |
Compliant
(Yes/No) |
Comment |
| Appropriate information displayed on the front cover such as student name, student number, programme name, course code, year of programme, etc. |
Presentation/Structure of the Document |
||
| All the main sections of the assignment should be numbered. | ||
| Section numbers generally start with the introduction; look at good quality text books and see how the sections are numbered. | ||
| A bibliography and appendices if you have them are not part of the main body of the assignment so therefore should not be numbered. | ||
| Consistent use of capital letters in the headings and captions in the Table of Contents, List of Figures, List of Tables, etc.. | ||
| Start each chapter at the top of a new page. | ||
| Avoid excessive use of bullet points. |
Page Numbering |
||
| The most commonly used format for numbering documents is i, ii, iii, etc. and then in the introduction move on to the number format 1, 2, 3, etc. The Introduction marks the start of the main body of the work so therefore the numbering should restart with the number 1.
Check to see how the Oxford English Dictionary is numbered. |
||
| There is no need to write the word page beside every page number; when you see a number on the bottom of a page it generally always denotes a page number. | ||
| Any font in the header or footer should be one or two font sizes smaller (generally font 10) than the main body of the text (font 12) so that it stays in the background; good quality text books follow this format. |
Formatting the Assignment
| Font type is consistent throughout the document; note also it should be size 12 and 1.5 spacing between lines. | ||
| Is the alignment of your paragraphs consistent e.g. do you use justify or left alignment? | ||
| Assignment is generally free from typing errors | ||
| When using abbreviations you should capitalise the words in the format e.g. Electricity Supply Board (ESB); after this point in your assignment you should just use the abbreviation | ||
| If you have a list of abbreviations, is it in ascending alphabetical order and formatted? | ||
| If you have a list of abbreviations – is it complete? | ||
| Use English spelling as opposed to American spelling. |
Figures, Tables, etc
| All tables need to be of a consistent style; retype them if necessary. | ||
| All figures, tables, etc. should be numbered, and have a caption.
Note: It is generally better to use the format Fig. 2.1 for figures, tables, etc. That is the figure numbers should follow the chapter number. |
||
| All figures, tables, etc. that you did not produce yourself should be referenced as to their source using the Harvard or IEEE referencing system | ||
| In a formal report you should have a cross-reference to all figures, tables, etc. in the main body of the text e.g. Fig. 2.1 indicates that …; also this should come before the figure in question. | ||
| The same size gap should be left before and after every figure, table, section, etc. |
Referencing
| N.B.: if you referencing is not correct you could fail the assignment | ||
| In-text citations should be used where you have drawn information from another source | ||
| In the Harvard referencing system you should use the format: (Murphy, 2015) for in-text citations; if you are referring to an author in the text you use the format: Murphy (2013). In the IEEE system you use numbers.
For double references, you should use the format (Murphy. 2015; McIntyre, 2018) or in the IEEE you use the format [7; 13]. |
||
| When quoting directly from a document you need to give the page number. In the Harvard reference system is generally follows the format: (Murphy, 2015: 15) and in the IEEE it follows the format [24: p. 18]. Also you should use commas e.g. ‘direct quote’ to indicate what sections are taken from source material. | ||
| Your list of references should follow the format in the learning support guide. | ||
| Include your citation inside the full stop of a sentence and not outside it. |
Need Help With Renewable Energy Case Study for Park House?
A student shared this brief with our team; personal details have been removed. Our Renewable Energy Technologies desk works on tasks like this and can guide you on how to approach it.
Many TU Dublin students struggle to complete the REEN 2215 Renewable Energy Technologies Assignment—whether due to the technical complexity of building regulations, difficulty evaluating renewable technologies, or time pressure when developing the Park House case study. But there’s no need to stress—Ireland Assignments offers TU Dublin Assignment Help with your coursework criteria.Before ordering, you can check our REEN 2215 Assignment Sample to see the quality of our work. Get our custom-written assignment help today—100% plagiarism-free, fully referenced (Harvard/IEEE), and written exclusively for you—and secure high grades in your Renewable Energy module.
